Remanufactured CV Axle Assembly

Your CV (constant-velocity) axle transmits engine torque from the differential to the front (or rear, on AWD/4WD) wheel hub while accommodating both suspension travel and steering angle. Each assembly uses two CV joints — an inner tripod joint that handles plunge and an outer ball-style joint that handles steering angle — connected by a splined shaft and protected by rubber boots packed with high-pressure grease. Common failure symptoms include a clicking or popping sound during sharp turns (worn outer joint), a vibration that builds with speed (worn inner joint or bent shaft), a torn boot leaking grease, and a clunk on hard acceleration.

Each assembly is fully remanufactured to OE specification. We replace both CV joints with new components, install new neoprene boots packed with the correct grease for the joint type, balance the shaft, and pressure-test the boots before assembly. Every axle is dimensionally inspected against the original-equipment shaft length and spline count to guarantee a direct fit. ABS reluctor rings (where applicable) are inspected and replaced if pitted.

Every Score Auto Parts component is covered by a 1-year warranty against defects in materials and workmanship from the date of purchase. Warranty is void if the part is installed on a vehicle not listed in the fitment table, or modified after purchase.

Returns accepted within 30 days for unopened, uninstalled parts. Core deposits are refunded upon receipt of your old part in rebuildable condition.