Remanufactured Rack & Pinion

Your rack and pinion converts the rotation of the steering wheel into linear motion at the inner tie rods, controlling left and right wheel angle through a pinion gear that drives a horizontally-moving rack. On front-wheel-drive and modern rear-drive vehicles, the assembly handles hydraulic boost through internal seals that wear, score the rack, and leak as the vehicle ages. Common failure symptoms include a power-steering whine that builds with steering input, fluid weeping from the boot or end-seal, a notchy or off-center on-center feel, and visible play at the inner tie-rod sockets.

Each unit is fully remanufactured to OE specification. The assembly is fully disassembled, the rack is inspected for scoring and trued where wear allows, all hydraulic seals and O-rings are replaced with 100% new components, and the pinion bearings are renewed. Every rack is then hydraulic-tested for flow rate, internal leakage, and lock-to-lock turn balance under load before it ships. The inner tie-rod sockets are inspected for play and replaced when out of spec.

Every Score Auto Parts component is covered by a 6-month warranty against defects in materials and workmanship from the date of purchase. Warranty is void if the part is installed on a vehicle not listed in the fitment table, or modified after purchase.

Returns accepted within 30 days for unopened, uninstalled parts. Core deposits are refunded upon receipt of your old part in rebuildable condition.